Welcome to Nanpi Yongguang Abrasives Co., Ltd. official website!
Set as Homepage| Add to Favorites | About Us | Contact Us | 中文
Nanpi Yongguang Abrasives Co., Ltd.
Professional mold manufacturer
Views:154 Updated:2016-01-28 11:24:00
Cleaning Method
In the production process to use diamond grinding wheel on the belt. General grinding wheel 5-7 days to remove the cleaning operation. (Above grinding down rubber debris after high temperature friction firmly attached to the diamond surface, difficult to clean)
Now we use acetone soak 2 hours, then washed with imported cleaner, works well, but is not environmentally friendly, not energy.
Cleaning requirements:
1, to environmental protection, non-one can not be a halogenated hydrocarbon.
2, can not damage the diamond grinding wheel
Installation Notes
Grinding wheel must be carefully checked and identification prior to installation. To check the identification of:
1, check whether the correct wheel grades, meets all the selection wheel performance, shape and size.
2, check the appearance of the structure and differential wheel situation. With the eye whether the appearance of damaged wheel (or cracks). The appearance of damage (or crack) the wheel can not be used. Another requirement wheel ends flat surface, no obvious skew.
3, check and identification grinding wheel internal cracks. By hand and wheel, grinding wheel with a wooden hammer tapping listen to his voice, no crack crackled wheel, the wheel is cracked hoarse voice, which can not be used.